Get started

Supported devices

Which Huawei routers FengSui is verified on, which it may work with, and where each feature stands on each.

FengSui is verified on the Huawei H168-383 (firmware 4.4.0.1) only. The tables below also list, by brand, other routers that use Huawei's HiLink web interface: FengSui will most likely connect to them too, but nobody has verified them with FengSui yet, so they run read-only and each write has to be turned on first; see Other Huawei models. If your model is not listed, try it anyway: Huawei HiLink routers usually connect as well, read-only.

To see what FengSui looks like on such a router first, open the live demo's other-model mode.

What the marks mean:

• ○ Verified: someone confirmed it on a real router, and it is in the code (VERIFIED_FEATURES). Everything is verified on the H168-383, which also works as usual on another firmware build and warns once with FIRMWARE_UNVERIFIED.
• △ May work: the protocol has the feature and FengSui implements it, but nobody has checked it on this model yet. Band lock (LTE only), sending and managing SMS, reboot, redial and mobile data can be tried there as experimental writes, each turned on under Settings → Device; changes to the router switches and access control are offered on verified models only for now.
• ? Unknown: FengSui knows only the H168-383's endpoints for it, and the protocol notes say nothing about other models; whether it works depends on the router.
• × Not supported: the protocol does not have the feature, or someone tested it on this model and it did not work (none in the table yet).
• "Router switches" are the security switches, Wi-Fi 7 and the antenna, where the router has them (Wi-Fi 7, for one, takes a Wi-Fi 7 router). A USB modem works only in HiLink mode, with its web interface.

#Huawei

#SoyeaLink

#Help verify your model

Choose "Report" on your model's row to open a new GitHub issue with the model already in its title. How to create and post a device report is under Report compatibility; an AI agent can also run the tests and draft the report for you, see Test with an AI agent. Once someone reports a feature working on a real router, its mark in the table turns into ○.

Edit this page on GitHub